To order Lazertran click on the image below:
Transfer Images onto Polymer Clay, Silk and Satin with Lazertran Silk Transfer Paper. For use with laser printers.
Print image onto Lazertran Silk in reverse or mirror on the shiny side.
1. Iron silk flat. Habutai Silk works really well.
2. Lay silk over your image and iron until the silk is stuck to the image. Use a hot iron.
3. Place the silk in clean water, paper side down and leave until the paper falls off.
4. Lift the silk carefully from the water and lay face down onto a cloth. Allow the iron to cool and iron gently from the back to dry the silk.
5. When dry return the iron to hot, turn the silk over and place a sheet of baking paper/parchment, (not waxed or old fashioned greaseproof), over the image.
6. Iron through the paper then allow to cool. Then peel off. This method produces a beautiful result for surface pattern. The silk can be rinsed in warm water but will not take a vigorous wash.
USING LAZERTRAN SILK Transfer paper TO TRANSFER AN IMAGE TO POLYMER CLAY.
1.Copy your image in reverse onto a sheet of lazertran Silk.
2.Put the image face on the clay and burnish to make sure of good contact and leave for 30 minutes.
3. Drop the clay with the image attached into a bath of water and leave for 2 minutes. Then swish the water with your hand until the backing paper floats off.
4. Remove the clay from the water and allow to dry for 1 hour.
5. Then shape and bake as per manufacturers instructions.
No comments:
Post a Comment